中文字幕欧洲有码无码-亚洲av福利天堂在线观看-精品一区二区三人妻视频-亚洲av色影在线

蘇州東偉元電子有限公司

咨詢電話:

13913158248

當前位置:

首頁   >  產品中心  >  中國臺灣儀鼎PICOTEST  >  PICOTEST測試訊號轉換器  >  J2112APICOTEST儀鼎儀器專業測試訊號轉換器

PICOTEST儀鼎儀器專業測試訊號轉換器

簡要描述:PICOTEST儀鼎儀器專業測試訊號轉換器代理銷售現貨供應INJBOI,INJB02,INJB03,J2100A.J2101A,J2102A,J2110A,J2111A,J2112A,J2120A,J2130A,J2140A,J2160A,J2180A,J2180A-20,J2190A

  • 產品型號:J2112A
  • 廠商性質:代理商
  • 更新時間:2024-11-03
  • 訪  問  量:2791

詳細介紹

給我們留言

品牌PICOTEST/中國臺灣儀鼎

PICOTEST儀鼎儀器專業測試訊號轉換器

 

J2111A / J2112A 

 

 

x

J2111A 
Solid State Current Injector

J2112A 
High Current Injector

  

 

 
 
 
 
icon可配合通用輸入型的高PSRR 低噪音穩壓器(J2170A)使用
icon20nSec典型的上升和下降時間
iconDC~40MHz可用的範圍 (interconnection dependent)
icon提供選擇開關,可雙極性(source or sink)操作
icon內建偏壓電流可配合網路分析儀使用
icon具有50Ω阻抗的精密電流量輸出(1V/1A)
icon可與任意波形產生器、函數產生器和網路分析儀配合使用
icon可用來測量電池阻抗
iconJ2111A- 詳細規格
iconJ2112A- 詳細規格
PICOTEST儀鼎儀器專業測試訊號轉換器J2112A
 

The current injector is one of the most versatile of the injector products. Coupled with the G5100A, or other equivalent function generator, it is capable of performing small signal load steps up to 40MHz, with very fast rising and falling edges. Using the G5100A, also allows the rise and fall times to be controlled, various waveforms or even arbitrary waveforms. This can be used to simulate the effects of many different types of loads, including high speed digital circuit loading, which is often largely dynamic.

The current injector can also be used to measure output impedance of power supplies, voltage regulators, power buses and even batteries. It can be used to non-invasively measure the stability of a combined input filter and the negative resistance of a switching power supply. It also has application in the measurement and extraction of transistor data, including small signal current gain, Ft and many other dynamic performance parameters.

In RF and instrumentation circuits it can be used to provide constant current biasing for class A amplifiers and buffers.

Measuring Output Impedance

The current injector has two connections for the output, Output and GND. The input is DC+AC and can be connected to either a signal generator or a network analyzer. A built in bias current enables Class A operation for use with a network analyzer. The Current Injector and DC Bias injector can also be used for this purpose.

The output current is reduced 40dB from the input signal, resulting in 10mA/V scaling. The current monitor is designed to be terminated into 50 Ohms and can be used with the network analyzer, an oscilloscope or a DMM to monitor current.

When used in conjunction with a voltage probe, the analyzer can measure Voltage/Current, which is the impedance.

 
Specifications
CharacteristicTypical
Maximum Input Voltage DC+ACVcc-1.5V
Output VoltageVcc-2V
Current Monitor1V / A
Modulator Gain10mA / V
Offset Current (typical)+/-24mA
Usable BandwidthDC ~ 40MHz
Temperature Range0 ~ 50°C
Maximum Altitude6000 Ft

 

 

  J2112A - Product Information

The J2112A Current Injector is an extremely versatile tool addition to the Picotest Signal Injector line-up. Coupled with the G5100A AWG, or other equivalent function generator, it is capable of performing small and large-signal load steps up to 40MHz, with up to 20ns rise/fall times, and with currents up to 1amp. Rise and fall times can be controlled and arbitrary waveforms can be used to drive the injector producing load current profiles of virtually any characteristic pattern. This is ideal for emulating all types of load conditions, including high speed digital circuit loading, battery discharge profiles, or spontaneous current spikes.

When coupled with a network analyzer, the Current Injector can be used to measure the output impedance of all types of circuits and systems including power supplies, voltage regulators, power buses, and batteries. It can be used to NON-INVASIVELY measure the stability of a combined input filter /negative resistance of a switching power supply or the phase margin of a linear or switching regulator WITHOUT the need to break the control loop.

It also supports applications in the measurement and extraction of transistor data, including current gain, Ft, and many other dynamic performance parameters. In RF and instrumentation circuits it can be used to provide constant current biasing for class A amplifiers and buffers.

J2112A測試訊號轉換器

  J2112A - Detailed Specifications:

Specifications
CharacteristicTypical
Max Input Voltage DC+AC+5 V
Max Output Current+1 A
Min Output Current24 mA
Max Output Voltage+/-10.5 V<
Current Monitor0.1 V/A
Modulator Gain0.2 A/V
Offset Current (typical)+240 mA<
-3dB Bandwidth (-10dBm)DC-50 MHz
Temperature Range0-50℃
Maximum Altitude6000 Ft
 

 

J2100A 1 hz - 5 mhz
J2101A  10 hz - 45 mhz
J2110A
J2120A
J2130A

J2140A

J2160A

J2180A

J2180A

J2190A

 

產品咨詢

留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯系電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯數字),如:三加四=7

相關文章

Articles
推薦產品
查看更多產品

24小時咨詢熱線

0512-66315386
聯系人:周瑞東 郵箱:13913158248@163.com 地址:蘇州吳中區沈東路89號奧星電子產業園 6棟513室

掃一掃,關注我們

版權所有©2024 蘇州東偉元電子有限公司  備案號:蘇ICP備13024284號-1

技術支持:化工儀器網  管理登陸  sitemap.xml

主站蜘蛛池模板: 成人夜色视频网站在线观看| 亚洲av综合永久无码精品天堂| 天堂俺去俺来也www色官网| 无码aⅴ精品一区二区三区浪潮| 两个美女大乳喷奶水| 欧美bbw极品另类| 四虎成人精品国产永久免费无码| 成人欧美一区二区三区的电影 | 免费极品av一视觉盛宴| 久久夜色精品国产噜噜| 无码一区二区三区av免费| 久久无码国产专区精品| 亚洲另类激情专区小说图片| 无套内谢的新婚少妇国语播放| 国产精品久久福利网站| 黄色a级国产免费大片| 进女小姪女体内的视频| 精品少妇人妻av无码久久| 久久午夜福利无码1000合集| 色婷婷日日躁夜夜躁| 日韩乱码人妻无码中文字幕 | 精品永久久福利一区二区| 高h小月被几个老头调教| 伊人久久大香线蕉av一区| 国产福利一区二区三区在线观看| 国产精品久久国产精麻豆99网站| 女人张开腿让男人桶爽| 国产免费久久精品99久久| 最新高清无码专区| av一本久道久久波多野结衣| 永久免费不卡在线观看黄网站| 亚洲av日韩av无码av| 日本高清www色视频| 久久99精品国产99久久6尤物| 狠狠色丁香婷婷久久综合| 精品人妻中文无码av在线| 与子敌伦刺激对白播放的优点| 国产一区二区三区不卡在线看| 国产亚洲人成网站在线观看| 人妻内射一区二区在线视频| 永久免费无码日韩视频|